VESTA

The VESTA 2813 is a 7,000 litre capacity seed drill with an amazing versatility that allows it to carry out all types of sowing as it can be equipped with a wide range of sowing equipments configurable in 2, 3 or 4 rows. Available in various working widths ranging from 5 m to 7.7 m and with electric or mechanical transmission.

Hopper with a capacity of 7,000 litres made of high-strength steel.
Optionally divisible for seed and fertiliser at a ratio of 60% and 40%.
Capacity for a third product by means of 2 optional hoppers of 205 litres each.
Floating chassis in three sections. ISOBUS mechanical or electrical metering by means of the ELEKTRA system.
Can be fitted with SM, PT, Double Disc and Tines Coulters.
Can also be fitted with 12-row PROSEM precision planters.
       
 

Straight Tine Coulter

 

Interchangeable tine coulter forged steel arm, with springs, for conventional sowing. It is the most widely used sowing gear as it allows sowing in very diverse conditions. Robust and suitable for prepared terrain. Its standard distance between sowing rows is 12.5 cm. Adjustable height on coulters behind the tracks. It is used on the pneumatic machines ARES and ARES-P, and mechanical machines such as the TRISEM-2110.
 

  1. High-strength sowing coulter.
  2. Tine coulter made of anti-wear material.
  3. Seed applicator Suffolk coulter.
  4. Flexible connection sleeve.
  5. Sleeve connection flange.
  6. Pressure spring with protective cover.
  7. Spring pressure adjustment.
  8. Attachment to Ares sowing bar using Ø14 mm U flanges.
  9. Seed transport tube made of anti-static material.

          

 
 

SM

Equipped on SM-1909, VESTA, SM-P, CERES and SD-3115. More than 3000 machines on the market use this arm.
Multipurpose seeding arm, for direct seeding, minimum tillage and conventional seeding. Interchangeable Tungsten Carbide tip with high wear resistance and very easy to change by means of a single screw.  The arms behind the roller have individual depth adjustment.
The 16 mm thick high resistance steel arm allows seeding in the most demanding conditions, with reduced maintenance costs.
 

  1. Double seeding pressure spring.
  2. Coulter made of high resistance steel.
  3. Interchangeable anti-wear material coulter and tungsten carbide tip.
  4. Applicator boot with anti-wear treatment.
  5. High resistance connection sleeve and flange.
  6. Seed transport tube in anti-static material.
  7. Individual pressure adjustment of the sowing arm.
  8. Individual depth adjustment (in adjustable versions).

    Siembra Directa            
 

PT

 

Light and robust, specially for three-point hitched machines such as the ARES and ARES-P, where weight is particularly important. It is a multipurpose coulter for conventional sowing, minimum tillage and non-till (in favourable conditions). It features an interchangeable tine, made of tungsten carbide, which is easy to replace. Made of high-strength steel that is 15 mm thick.

 

  1. Robust, high yield sowing coulter.
  2. Interchangeable tine coulter made of anti-wear material and a tungsten carbide tine.
  3. Interchangeable seed dispenser.
  4. Attachment to Ares sowing bar using Ø14 mm U flanges.
  5. Coulter pressure spring.
  6. Connection sleeve and mounting flange.
  7. Seed transport tube made of anti-static material.
  8. Spring pressure adjustment.

                Siembra Directa

 
 

Suffolk Coulter

 

Installed on the three-point hitched pneumatic models ARES, ARES-P and NEU-P. It is a special coulter for conventional sowing. Very light and adaptable to the terrain. Excellent depth control on light or heavily worked terrain. It is recommended that they are installed with a front cultivator and leveller.

 

  1. Coulter made of a tubular steel structure.
  2. Furrower Suffolk coulter made of steel highly resistant to wear.
  3. Pressure regulation.
  4. Seed tube connection sleeve.
  5. Anti-recoil Suffolk coulter closure.
  6. Seed transport tube made of anti-static material.

                

 
 

Disc

 

Installed on the machines ED-1003, ARES, ARES-P and NEU-P. Ideal for conventional sowing. Light and adaptable to the terrain. The concave disc system allows good sowing quality with a certain amount of plant debris. Adjustable rear wheel for better depth control as an option.

 

  1. Internal scraper disc.
  2. Ø325 mm concave opening disc made of anti-wear material.
  3. Independent pressure regulation.
  4. Optional Ø320 mm x 50 mm rear depth control wheel.
  5. Connection sleeve and anti-static tube.

                

 
 

Double disc with Parallelogram

 

Mounted on the ARES, ARES-P and NEU-P with double disc. The offset double disc, mounted with a parallelogram and an adjustable wheel for depth allows conventional sowing and minimum tillage, with the highest efficiency, precision and control.

 

  1. Double opening disc offset by 14” made of boron steel.
  2. Bearing with triple shielding to protect against dust ingress.
  3. Ø350 mm x 50 mm semi-pneumatic depth control wheel.
  4. Independent regulation of sowing depth.
  5. Individual pressure regulation.
  6. Surface copying system using articulated parallelograms.
  7. Anti-static seed transport tube.
  8. Articulation via anti-friction bushings.
  9. Clamping flange.
  10. Highly-flexible connection sleeve.
  11. Closing wheel inner bearing with triple shielding
  12. to protect against dust ingress.
  13. Optional scrapers on depth control wheel.


                
 

 


Multi-product divisible hopper

The hopper of the VESTA 2813 can optionally be configured in two parts for seed/fertiliser or seed/seed in a ratio of 60-40. In addition, it can be equipped with two outer hoppers for micro-granular products such as insecticides, micro-granular fertilisers, micro-irrigation, etc.

Double metering unit system

The combined seed and fertiliser spreader VESTA 2813 is equipped with two stainless steel distributors with easily interchangeable rollers for different products. This feature is standard on all ELEKTRA models.

Depth control on the lift

This system, which is fitted as standard on the VESTA, acts as a depth control on the linkage. It is adjusted by means of a plate and performs this function in addition to the main depth control system for the wheels of the sowing unit.
  600/30 680/34 760/38
Pulled hopper  
Seed hopper capacity [l] 7000
Seed/fertiliser hopper capacity [l] 4380/2620
Wheels (2) 550/60-22.5
Reload height [cm] 284
Reload opening [cm] 196X252
Metering unit type Stainless steel volumetric
Metering unit drive Mechanical
Turbine drive Hydraulic
Required hydraulic flow [l] 40
Controller/monitor Standard. See characteristics in chap. "Control monitors"
Half-width shut-off (4) Optional.
Minimum power required [hp]  160 160 180
Removable selector sieve Standard
Signal lights and work lights Standard
Dose calibration kit Standard
Diameter of the hole for the coupling pin [mm] 32
Seeding equipment  
Furrower type SM
Working width [m] 6 6,8 7,6
Number of rows 3 3 3
Transport width [m] 3,05
Number of rows 30 34 38
Row spacing [cm] 20,0 20,0 20,0
Double spring harrow Optional. First row of angled tines and second row of straight tines.
Depth control wheel equipment: number 2 wheels on wings and 2 wheels on central part 4 wheels on wings and 2 wheels on central part
Weight of hopper + seeding equipment [kg] - - -
Road transport type approval Check available type approvals per market
  500/31 600/37 700/43 770/47
Pulled hopper  
Seed hopper capacity [l] 7000
Seed/fertiliser hopper capacity [l] 4380/2620
Wheels (2) 550/60-22.5
Reload height [cm] 284
Reload opening [cm] 196X252
Metering unit type Stainless steel volumetric
Metering unit drive Mechanical
Turbine drive Hydraulic
Required hydraulic flow [l] 40
Controller/monitor Standard. See characteristics in chap. "Control monitors".
Half-width shut-off (4) Optional.
Minimum power required [hp]  160 160 180 180
Removable selector sieve Standard
Signal lights and work lights Standard
Dose calibration kit Standard
Diameter of the hole for the coupling pin [mm] 32
Seeding equipment  
Furrower type SM
Working width [m] 5 6 7 7,7
Number of rows 4 4 4 4
Transport width [m] 3,05
Number of rows 31 37 43 47
Row spacing [cm] 16,1 16,2 16,3 16,4
Double spring harrow Optional. First row of angled tines and second row of straight tines.
Depth control wheel equipment: number 2 wheels on wings and 2 wheels on central part 4 wheels on wings and 2 wheels on central part
Weight of hopper + seeding equipment [kg] - - - -
Road transport type approval Check available type approvals per market
  600/30 680/34 760/38
Pulled hopper  
Seed hopper capacity [l] 7000
Seed/fertiliser hopper capacity [l] 4380/2620
Wheels (2) 550/60-22.5
Reload height [cm] 284
Reload opening [cm] 196X252
Metering unit type Interchangeable modular rollers
Metering unit drive ISOBUS electric
Turbine drive Hydraulic
Required hydraulic flow [l] 40
Controller/monitor From ISOBUS monitor (not included as standard, see chap. “Control monitors”)
Sowing cut-off Standard
Half-width shut-off Only available on machines with 2 distribution heads. Automatic if combined with a GPS antenna.
Minimum power required [hp]  160 160 180
Removable selector sieve Standard
Signal lights and work lights Standard
Dose calibration kit Standard
Diameter of the hole for the coupling pin [mm] 32
Seeding equipment  
Furrower type SM
Working width [m] 6 6,8 7,6
Number of rows 3 3 3
Transport width [m] 3,05
Number of rows 30 34 38
Row spacing [cm] 20,0 20,0 20,0
Double spring harrow Optional. First row of angled tines and second row of straight tines.
Depth control wheel equipment: number 2 wheels on wings and 2 wheels on central part 4 wheels on wings and 2 wheels on central part
Weight of hopper + seeding equipment [kg] - - -
Road transport type approval Check available type approvals per market
  500/31 600/37 700/43 770/47
Pulled hopper  
Seed hopper capacity [l] 7000
Seed/fertiliser hopper capacity [l] 4380/2620
Wheels (2) 550/60-22.5
Reload height [cm] 284
Reload opening [cm] 196X252
Metering unit type Interchangeable modular rollers
Metering unit drive ISOBUS electric
Turbine drive Hydraulic
Required hydraulic flow [l] 40
Controller/monitor From ISOBUS monitor (not included as standard, see chap. “GNSS receivers”)
Half-width shut-off (4) Optional. Automatic if combined with a GPS antenna
Minimum power required [hp]         
Removable selector sieve Standard
Signal lights and work lights Standard
Dose calibration kit Standard
Diameter of the hole for the coupling pin [mm] 32
Seeding equipment  
Furrower type SM
Working width [m] 5 6 7 7,7
Number of rows 4 4 4 4
Transport width [m] 3,05
Number of rows 31 37 43 47
Row spacing [cm] 16,1 16,2 16,3 16,4
Double spring harrow Optional. First row of angled tines and second row of straight tines.
Depth control wheel equipment: number 2 wheels on wings and 2 wheels on central part 4 wheels on wings and 2 wheels on central part
Weight of hopper + seeding equipment [kg] - - 5750 -
Road transport type approval Check available type approvals per market
Share it:
Catalogo Vesta EN web.pdf Catalogo Vesta EN web.pdf Catalogo Vesta EN web.pdf 1 Mbytes English
Catalogo Vesta ES web.pdf Catalogo Vesta ES web.pdf Catalogo Vesta ES web.pdf 4.45 Mbytes Spanish
Catalogo Vesta FR web.pdf Catalogo Vesta FR web.pdf Catalogo Vesta FR web.pdf 1.01 Mbytes French
Catalogo Vesta RO web.pdf Catalogo Vesta RO web.pdf Catalogo Vesta RO web.pdf 4.45 Mbytes Romanian
Vesta RU web.pdf Vesta RU web.pdf Vesta RU web.pdf 1.05 Mbytes Russian
Vesta_2813_SM Siembra Directa.pdf Vesta_2813_SM Siembra Directa.pdf Vesta_2813_SM Siembra Directa.pdf 910.34 Kbytes Spanish